Product Image
Qty.
Item Name-
Price
6
Product: Polyurethane bush kit, front radius rod to lower control arm. One kit does both radius rods. Model: 1973*-79 Civic Contents: 4 bushes, 1...
$71.05 Add:
6
Product: Polyurethane bush kit, front radius rod to crossmember. One kit does both radius rods. Model: 1973-79 Civic Contents: 4 bushes, 1 pouch...
$43.69 Add:
11
Product: Polyurethane bush kit Fitment: 1973-79 Civic 2,3,4,5 door. Front or rear lower control arm inner. One kit does two lower control arms (i.e....
$55.09 Add:
10
Product: Polyurethane replacement balljoint boot. If you've damaged to the original rubber boot undoing a balljoint then this will keep the dust and...
$26.00 Add:
0
Engine torque rod bush (aftermarket). Fits in the engine end of the torque rod.
$5.50... more info
29
Model: Civic 1973-83 (all models - 2, 3, 4, 5 door and wagon) Condition: New, reproduction. Description: Reproduction 'chrome' trim for the roof drip...
$85.00 Add:
95
Replacement door outer weatherstrip (beltline) clips. Pack of 10.
$3.00 Add:
88
Outer weatherstrip that seals along the door at the bottom edge of the window (also know as a beltline or possibly scraper seal). Fits 2 & 3 door...
$25.00 Add:
95
Replacement door inner weatherstrip (beltline) clips. Pack of 10.
$3.00 Add:
87
Inner weatherstrip that seals along the door at the bottom edge of the window (also know as a beltline or possibly scraper seal). Fits 2 & 3 door...
$25.00 Add:
10
Door bailey channel rubber (flocked rubber the windows slides in). One length, enough to do two doors.
$114.00 Add:
5
Door seals. One length of sponge rubber, enough to do both doors. It needs to be cut to size, joined at the top corner (cut at 45 degrees and use...
$63.75 Add:
48
Door seal clips, 50 pieces.
$4.00 Add:
5
Repair kit to fix a 'floppy' Right side outside door handle. Model: 1973-79 Civic, 1976-81 Accord 3-door Contents: 3 x stainless steel pivot pins (1...
$25.00 Add:
3
Repair kit to fix a 'floppy' LEFT side outside door handle. Model: 1973-79 Civic, 1976-81 Accord 3-door Contents: 3 x stainless steel pivot pins (1...
$25.00 Add:
19
Pinchweld to cover the seam around the door opening on the body. The original does not completely encircle the door opening but rather covers the...
$24.70... more info
1
Differential bearings. One pair of bearings to do both sides of the diff. Model: All 4 & 5-speed Civic boxes 1973-83, Accord 1976-78, City 1981-84,...
$50.60 Add:
2
Reproduction coat hanger hook. Fits in place of a grab handle above one of the doors or quarter windows. Fits: 1973-77 Civic Available in the...
$8.00 Add:
12
Model: Civic 1973-83, Accord 1976-78 Description: Clutch thrust bearing carrier (with bearing). Condition: New (non genuine)
$20.00 Add:
0
Rocker cover breather gasket Model: Civic 1973-79, Accord 1976-78 Condition: New Old Stock Honda part numbers: 12412-634-000
$5.00... more info
1
Left driveshaft. Model: Civic 1973-79 This is the early thin type driveshaft used up until about 1975 or 76 when they changed to a thicker shaft. It...
$350.00 Add:
28
Exhaust pipe gasket Model: Civic 1200 1973-79, 1500 1975, N600, Z600 plus a range of bikes Condition: New Old Stock. Honda part number: 18212-634-000
$3.00 Add:
42
Reproduction bonnet prop holder. Fits: 1973-79 Civic There are two different versions. The early cars up to about 1976 used a 6mm steel rod that...
$8.00... more info
254
Bolt that holds the stainless steel trim onto the front of the bonnet (hood). Includes nut. The number of bolts needed will depend on the model: Most...
$2.00 Add:
1
Con rod bearing C (brown) Model: Accord 1976-83, Civic 1500 1975-83, Prelude 1979-82 Condition: New Old Stock. Honda part number: 13213-PB2-004
$5.00 Add: